This high quality speaker is ideal for  discreet installations, it can be hung on the wall (or ceiling for Atmos speakers), and can be rebated into the wall, by removal of bricks, or better still a false wall (similar to dry lining) can be constructed to hide the shallow rear chamber , and all associated cables .

The AVC4 Flat Panel is a discreet 11 litre infinite baffle speaker using the superb quality IPL6/M/S shielded bass unit, specifically designed with a very stiff but light magnesium cone  cone to give a very linear response and roll off, and a clean, detailed, but smooth sound.  The tweeter is the IPL TN25 textile dome compact unit with neodymium magnets and an exceptionally smooth response . This speaker has been designed to complement very high quality AV systems and is attractive and flat enough (only 122 mm deep)  to wall mount. PLEASE NOTE. these speakers are not a compromise they sound superb, and have been further improved with heavy duty, high sound absorption, lining on the rear panel.

The AVC4 uses a magnesium bass cone to ensure a delightful, dynamic, detailed, but pure smooth sound with good speech clarity and sensitivity, and a bass response which extends down to 55hz. The overall balance is: large scale, clean but not bright ensuring that  the speaker does not become tiring to listen to at higher volume levels (as is the case with many AV speakers). There is provision to adjust the treble level to suit your AV systems by changing a resistor in the treble crossover section. The crossover which is  second order uses  polypropylene capacitors in the treble leg, Steel laminate and super power inductors, and high power resistors.Also incorporated on the back  internal panel in the Plus kit  is heavy duty rubber profiled damping lining together with Profiled acoustic foam  (on the sides top, and base) which scatters the sound waves, eliminating boxy colourations ,improving clarity, and imaging, and damps the back panel.,  A connection panel with Gold terminals and a separate crossover board for mounting the components is included in the Plus kit,. For best results use with an IPL Active subwoofer SW4, SW5 or SW6  kit which will allow perfect integration.

 The shallow box which is extremely strong in 18mm MDF can be painted (emulsion paint covers MDF very well), or veneered with the iron on veneer, as supplied by IPL in ash, mahogany, oak or walnut ,. 1 roll should do the front panel and sides, top and base of 2 speakers. The other panels can be painted a similar colour 


Impedance ohms....8 Dimensions mm..........465Hx 355W x122 D
Sensitivity db spl........88 Cabinet material .........18mm MDF; front, sides,  top and base. 12mm rear panel, and 9mm grille panel.
Crossover khz....... 2nd order  at 3.khz Suggested wiring..........HU1 silver PTFE (3m)
Frequency response Hz..55 - 22k Frequency Linearity....+or- 1.0 db (200-20k)
Basic kit 2 x IPL/6/M/S,bass units, 2 x IPL TN25 tweeters, 2x crossover kits, full instructions.
Plus kit AS basic kit inc. Grille material (black or brown) and grille fixing studs, mounting screws,2 x CP2 L gold terminal panels and crossover board, Profiled Acoustic Foam, heavy duty  rubber damping panels .. Mounting brackets
Total kit As Plus kit inc. 18mm cabinet kit including grille panel.

 Cabinet kit included with total kit

 Iron on veneers see cabinet accessories