Feedback on S2tl and other IPL Kits

The S2tlm Ribbon is a compact transmission line giving a very detailed large scale and natural sound. The S2tlm Ribbon uses the superb   IPL/6/M  with its ultra light but stiff magnesium cone, smooth response, sturdy cast chassis , and large shielded magnet assembly, and  the superb Fountek CD3.0 Ribbon tweeter. The Cd3.0 is a very high quality unit with high strength Neodymium magnets .The advantage of the ribbon is a 10x better mass to magnetic flux ratio, over most dome tweeters giving a fast and transparent sound. All drivers  are matched for response and sensitivity. The S2tlm Ribbon has been designed to work in  slightly smaller rooms than the S2tlk of at least 14ft by 12ft with speakers preferably firing the length of the room, ideally at least 16" from the side wall and 10" from the rear wall. ( If you are not sure of the best model to choose please call or email to discuss)

The S2tlm Ribbon  bi-wired crossover is 2nd order at 3.0 khz, and incorporates high quality  IPL Polypropylene capacitors   IPL  Steel laminate bass inductors,  air cored treble inductors, and high power resistors. Line damping is with 80% IPL"s Profiled Acoustic Foam, 20% Heavy Duty Rubber damping and  Long Haired wool. for fine tuning. The total kit includes a very solid flat-pack cabinet (with 12 x  18mm MDF panels per  speaker), including internal baffles, angled deflectors, and a shaped grille frame,  Plus and Total Kits now include the CP4L Gold Terminal Crossover panel.



Impedance ohms...............8 Dimensions mm............... 903mm (inc.spikes) x230W x310D
Line Type........................ triple-folded Cabinet material...............18 mm MDF (grille 9mm)
Crossover khz......3.khz , 2nd  order Suggested int. wiring .....HU1 silver PTFE (5m reqd)
Sensitivity db SPL....89 Suggested min room size ..14 x 12ft or equiv.
Frequency Response....27htz - 30khz Frequency Linearity...+ or - 1.5db (250 to 20khz)
Basic kit

2 x IPL/6/M, 2 x IPL CD3.0 matched Ribbons, 2 x crossover kit, full instructions

Plus kit As above inc. Grille material and studs (blk or brn), Tnuts and bolts, 2 x CP4L terminal/connection panels, Profiled Acoustic Foam, Heavy Duty Contoured Rubber damping, & L.H. Wool, adjustable floor-spikes , and rigid foam for port.
Total kit 24 piece 18mm MDF cab kit available in Plain MDF with shaped grille panel,  and internal panels, deflectors.

Cabinet kit inc. with total kit Plain or mahogany

Iron on veneers see cabinet accessories

 Profiled Foam and Heavy Duty Rubber Contoured Damping